from and about sicurTEC


sicurTEC sets new standards
in burglar-resistant security glazing
for emergency escape doors with
panic exit devices compliant
with EN 1627ff:2011.
New RC2, RC3 and RC4 –
developments as regards
optimisation of thickness
and weight as well as additional
successful EN-tests carried
out at German test centres.

In 2011, Sicurtec successfully passed all tests required
for panic glazing. The tests included the previous
standard ENV 1627ff:1999, meaning the resistance levels
WK2, WK3 and WK4, panic glazing
and for the newer standard EN 1627ff:2011
for classifications RC2, RC3 and RC4 panic.
Re. RC2:
The previously tested RC2-panic glazing was
a glass-polycarbonate laminate
with a thickness of 16mm and a weight of 29 kg/m².
Upon request, it was also designed to meet the requirements
of the burglary resistance classes P6B compliant with EN 356.
According to the standard this additional feature
was not absolutely necessary as with RC2 panic it only
stipulates the minimum requirement of P4A,
which means impact resistance in compliance with EN 356.
The RC2-panic glazing that we have recently developed
and tested with a thickness of 16 mm and a weight
of 35 kg/m² has a different structure, enables
the system’s conformity with impact resistance P4A
and is lower cost.
Both RC2 variants are still available, depending on whether
a RC2 with P6B or RC2 with P4A qualification is required.
Re. RC3:
Developed in 2011, the successfully tested RC3-panic glazing
had a thickness of 36 mm and a weight of approx. 68 kg/m².
However, it was an extremely complicated
9-layer glass-polycarbonate structure
(including intermediate layers), which was laborious
to produce and as a result expensive.
After several months of development it was possible to reduce
it to a 6-layer glass-polycarbonate structure,
which passed the test successfully.
The new RC3-panic glazing is only 28 mm thick and
weighs 52 kg/m². Hence, not only a considerable reduction
in thickness and weight but also
a significantly lower price could be achieved.
Re. RC4:
For this "mammoth class" we used to provide an insulation glass
element with a thickness of approx. 65 mm and
a weight of 102 kg/m².
14 layers of glass, polycarbonate and polyurethane
were necessary for this glazing solution.
As a consequence, the price was correspondingly high.
The streamlined sicurLITE RC4-panic glazing consists
of only 9 layers, has a thickness of approx. 40 mm
and a weight of 68 kg/m².
What’s more, it is reasonably priced.

Thanks to these innovations in the sector of panic door glazing,
sicurTEC has added a new dimension to European glass manufacture. 

To find out more
Home      L'entreprise      Galileo Extreme      Downloads      Contact      Mentions légales